Thank you!
Vairāk informācijas par to, kā Epson rīkojas ar personisku informāciju, lasiet mūsu paziņojumā par konfidencialitāti.
Submit your contact details below and an Epson expert will be in touch:
Vairāk informācijas par to, kā Epson rīkojas ar personisku informāciju, lasiet mūsu paziņojumā par konfidencialitāti.
The Epson Projector Management application (otherwise known as EPM) is an updated version of EasyMP Monitor combined with the EasyMP Network Updater. This all-in-one application allows you to check the status of multiple networked projectors and perform various projector operations from your computer, including:
You can visually check projector information such as power status, errors, and warnings so you are alerted to projector abnormalities immediately. You can also select individual projectors or projector groups to check detailed information such as the usage hours of the projector light source, the current input source, and any current errors or warnings.
You can turn projectors on or off, or change input sources for individual projectors or projector groups. You can schedule various projector events to occur automatically on the specified date and times.
You can distribute images or text messages to multiple projectors for simultaneous display on those projectors.
Once you select a projector's menu settings, you can copy the settings to multiple projectors of the same type in a batch setup operation.
You can update firmware for a projector over a wired network. You can also schedule when the firmware updates will take place.
You can set up the projector to send you an email alert over the network if there is a problem with the projector.
You can monitor and control projectors that support the PJLink protocol.
Automatic notifications of latest firmware versions.
This software is a replacement for both EasyMP Monitor and Network Updater and will continue to be updated, please check the Epson Projector Software support page to obtain the latest available version.
The application supports the most common Windows operating systems and computers, please check the latest 'Operation Guide' that is provided with the latest version of the Epson Projector Management application.
You can transfer setting information from the EasyMP Monitor software (version 4.50 or later). Start the Epson Projector Management software on the same computer and the settings are imported automatically the first time you start the software. When finished, you see an message telling you that the settings are imported.
If you want to use the imported settings on another computer that is running the Epson Projector Management software, you can save a configuration file on the original computer using the Save Configuration File feature on the Environment setup screen. Then copy the resulting configuration file to the following directory on the other computer.
C:\ProgramData\SEIKO EPSON CORPORATION\Epson Projector Management
Follow these instructions to select a connection method between a computer and the projector, and then set up the projector.
Connect the projector to your network using the Advanced connection mode.
To update the projector firmware or copy the projector settings, connect the projector using a wired network system.
To connect a computer to the projector using a wired LAN, you need to select network settings on the computer and the projector.
![]() |
---|
To set up a network connection, if necessary, see the documentation supplied with your computer or network adapter. |
A screen like one of the following is displayed.
To connect a computer to the projector over a wireless LAN, you need to select network settings on the computer and the projector.
![]() |
---|
To set up a network connection, if necessary, see the documentation supplied with your computer or network adapter. |
A screen like the one of the followed is displayed.
The necessary settings vary depending on your projector. See your projectors User Guide for instructions.
To manage projectors, you must register the projectors to the Epson Projector Management software. Once registered, the projector status is automatically displayed when you start the Epson Projector Management software.
If you need to register a large number of projectors, you can create projector groups so you can monitor and control the projectors in small units.
You can register up to 2000 projectors and groups in total. To monitor a large number of projectors, make sure your computer meets or exceeds the system requirements.
You can search for projectors on the same segment automatically or search for projectors by specifying an IP address.
The Epson Projector Management software starts.
The Projector Registration screen appears.
![]() |
---|
If you want to search non-Epson projectors that support PJLink Class2 automatically, select Search for Projectors in PJLink (Class2). |
You see a list of network projectors.
The registered projectors are now visible in the Epson Projector Management main screen.
![]() |
---|
|
Registering projectors to a group allows you to monitor and control multiple projectors all at once. When you select a parent group, you can also monitor and control all projectors included in multiple groups.
You see the registered group in the Epson Projector Management main screen.
To verify the projectors included in the group, select the Grouping view icon on the main window.
You can update the firmware on demand or schedule a time for the firmware update to be completed later on.
Contact your nearest Epson support center for more information on acquiring your projector firmware.
When you update the firmware, make sure of the following:
![]() |
---|
|
Projectors that can be updated by using this firmware file appear in the left pane of the Update List view.
The update schedule is displayed on the right pane of the Update List view.
![]() |
---|
|
The firmware is updated at the date and time you set, and the LED indicator on the projector turns on. When the firmware update is complete, the projector turns off and it enters standby mode. While updating, you can check the firmware update status on the right pane of the Update List view.
![]() |
---|
|
Sekmīgi pievienots jūsu grozam